1. Camera Model

This document applies to the Dahua camera model: IPC-K35

2. Camera Configuration Overview

The following parameters must be configured on the camera:

• - Administrator password
• - Static IP address
• - RTSP protocol port
• - Video stream rotation
• - Audio deactivation

The camera web page must be accessible from the UL network.

By default, cameras are configured in DHCP mode. To detect the IP address, use Windows Network Explorer:

Double-click the camera icon to open the configuration page in your browser.

Default login password is: admin

For new cameras, you will be prompted to change the password. Set it to: root4424

2.1 Configure TCP/IP Address

From the web interface, set the camera to use a static IP address. Enter the required IP, subnet mask, and gateway.

2.2 Configure the RTSP Port

Set the RTSP port to: 4530

2.3 Disable ONVIF

Important: Make sure the ONVIF tab/function is disabled.

2.4 Disable Audio Function

To preserve bandwidth, it is recommended to disable audio devices.